Thông số sản phẩm DSP Audison Bit One
Inputs
- 8 independent high-level channels or 6 independent analog low-level channels
- 2 analog low-level stereo auxiliary inputs
- 1 optical digital input
- 1 electric coaxial digital input
- 1 high-level momentary audio interrupt input (with Mute IN) for use with mobile phone or navigation systems
Outputs
- 8 independent low-level analog channels and 1 AD Link output
- (8 independent digital audio channels through a single CAT 5.S LAN cable for use with AD Link provided amplifiers)
- Connections
- 1 USB /B (2.0) connector for PC connection
- 2 AC Link control bus connectors for DRC and AC Link amplifiers
- System
- Full range stereo or multichannel signal derived through automatic summing of up to eight high level inputs
- Configuration
- Guided procedure to assign input channels to selected output channels based on inputs, speaker and amplifier configuration
- If necessary, Bit One creates a rear, subwoofer and center channel output (mixed L+R) from a single stereo input
- In/Out Volume
- Input sensitivity automatically adjusted for the main inputs (with supplied Test CD and DVD)
- Manual input sensitivity adjustment for auxiliary inputs
- Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB)
- Equalizer
- Dynamic equalizer: system self-adjusts between low and high listening levels
- Automatic de-equalization of signal fed into the high-level inputs
- (with supplied Test CD and DVD)
- Four separate 31-band graphic equalizers (1/3 Oct.; ±12dB) for each auxiliary inputs
- Eight independent 31-band graphic equalizers (1/3 Oct.; ±12dB) for each of the eight output channels
- Crossover
- Filter Filter typology: Selectable; Hi-pass, Lo-pass, Bandpass, Full Range
- Cut-off frequency: 70 steps available from 10Hz to 20kHz
- Cut-off slope: Selectable; 6 to 48 dB/Oct.
- Alignments: Selectable; Linkwitz or Butterworth
- Mute: Selectable for each output (On/Off)
- Phase: Selectable for each output (0°/180°)
- Time Alignment
- Guided procedure for the inputting of speaker distance with an automated calculation of proper delay times for each channel for accurate time alignment set-up.
- System also provides for manual fine tuning of delay.
- DRC
- Master Volume control, Subwoofer Volume control, Balance control, Fader control, Input selection, Memory selection,
- Dynamic Equalizer On/Off
- Memory
- 4 presets separately managed and recalled from the DRC Remote Control
- Standard Mode
- Simplified management of crossover and equalization functions for expedient set-up and use
- Expert Mode
- Full management of crossover and equalization functions for full reference grade system tuning
